Author Topic: what metal is this?  (Read 5074 times)

0 Members and 1 Guest are viewing this topic.

Offline kaloy

  • Sr. Member
  • ****
  • Posts: 329
what metal is this?
« on: August 30, 2011, 05:56:55 AM »
help ID this metal; any info? weigh a hundred kilos.

Offline admin

  • Administrator
  • Hero Member
  • *****
  • Posts: 3477
  • Gender: Male
    • Southeast Asia Maritime Foundation
Re: what metal is this?
« Reply #1 on: August 30, 2011, 07:58:16 AM »
Looks like regular steel to me. Maybe an engine part.
TW

Offline kaloy

  • Sr. Member
  • ****
  • Posts: 329
Re: what metal is this?
« Reply #2 on: September 03, 2011, 02:07:23 AM »
thanks... the metal is heat resistant. cant be cut by oxyacetylene torch... the cut portion at the side is where we cut a sample using a grinder... not sure if the lab result here in the phils. is accurate. they say its 50% thullium

bovic32

  • Guest
Re: what metal is this?
« Reply #3 on: September 03, 2011, 02:54:14 AM »
I agree with Admin., we encounter already that kind of metal which is a part of sunk ship...the same story it is heat resistant...maybe part of an engine...

Offline ZOBEX

  • Hero Member
  • *****
  • Posts: 979
Re: what metal is this?
« Reply #4 on: September 20, 2011, 02:27:06 AM »
thanks... the metal is heat resistant. cant be cut by oxyacetylene torch... the cut portion at the side is where we cut a sample using a grinder... not sure if the lab result here in the phils. is accurate. they say its 50% thullium

I seriously doubt Thulium,

http://en.wikipedia.org/wiki/Thulium

The higher the nickel content of steel, the harder it is to cut with a torch.  Probably a high nickel content steel.

Z


Offline ghost

  • Sr. Member
  • ****
  • Posts: 458
Re: what metal is this?
« Reply #5 on: September 26, 2011, 12:56:49 PM »
It's still a money if you sell it to a junk shop. There is no special on that, just a piece of crane joint for hoisting mega loads. Just my piece of observation.  ;)

t_hunter44

  • Guest
Re: what metal is this?
« Reply #6 on: April 22, 2012, 11:34:53 PM »
It's still a money if you sell it to a junk shop. There is no special on that, just a piece of crane joint for hoisting mega loads. Just my piece of observation.  ;)
     I wouldn't sell that metal to a Junk Shop. That metal has a TM mark and TM means Thulium and it is a rare metal and the price of Thulium is $40 to $50 per gram. That is worth some money and you said it is about 100 kilos. Hopefully you still have it.

       http://www.hobart.k12.in.us/ksms/PeriodicTable/thulium.htm
« Last Edit: April 22, 2012, 11:51:15 PM by t_hunter44 »

t_hunter44

  • Guest
Re: what metal is this?
« Reply #7 on: April 22, 2012, 11:39:28 PM »
More info about Thulium. The info below tells us what that metal is used for.

      http://eve-tools.org/productMarketOffers.html?itemName=Thulium

Offline zeeker

  • Moderator
  • Hero Member
  • *****
  • Posts: 525
Re: what metal is this?
« Reply #8 on: April 23, 2012, 04:16:02 AM »
thanks... the metal is heat resistant. cant be cut by oxyacetylene torch... the cut portion at the side is where we cut a sample using a grinder... not sure if the lab result here in the phils. is accurate. they say its 50% thullium

if true that it's 50% Thullium and sir Thunter said it is selling at least $40 a gram. then you would be $2,000,000 richer!
continue the journey